| Proxim |
High-Capacity Wireless Backhaul
Proxim Wireless offers extremely reliable, secure and easily-deployed solutions for interconnecting corporate and telecommunications networks. This portfolio includes:
• GigaLink® – Alternative to fiber, up to a Gigabit speed
• Lynx.GX® – Cellular voice and data backhaul, up to DS3 interface
• Tsunami.GX® - Carrier-class IP Ethernet bridge for voice and data backhaul for service providers and enterprise applications
• TeraBridge™ – Ethernet backhaul or traditional telecommunications converged voice and data networks
• QuickBridge® – Complete “hop-in-a-box" Ethernet bridge for campus and small business networks
Proxim Wireless is a global provider in scalable broadband wireless networking. From Wi-Fi to wireless Gigabit Ethernet – our WLAN, mesh, point-to-multipoint and point-to-point products are available through our extensive global Deploy in Days
channel network.
Applications
• Cellular voice backhaul
• Backbone connection
• High-capacity voice network redundancy |
|
New Manageability and Installation Flexibility Lowers Total Cost of Ownership (TCO)
Proxim’s Lynx.GX® is a high-capacity, full-duplex point-to-point digital radio product line with a
unique split-box design supporting T1/E1 capacity. This new generation of products, designed
for maximum installation flexibility, provides unprecedented system gain and carrier-class
operational features for cellular backhaul, enterprise voice applications and voice network
redundancy.
• Adapts to individual maintenance, system performance, and budget requirements to fit a
variety of specific operator needs
• Simplifies future upgrades by requiring only Indoor Unit (IDU) replacement as capacity
requirements grow
• Two-piece split-box assembly, consisting of an Indoor Unit (IDU) and an RF Unit, provides
installation flexibility
• Indoor-only installation facilitates quick maintenance and easier upgrades
• Indoor/outdoor installation improves system gain, lowers tower leasing costs and reduces total cost of ownership
Easily Manage and Troubleshoot Your Wireless Network
Lynx.GX radios offer sophisticated, preventative management tools to simplify network maintenance and eliminate downtime. Advanced diagnostic tools identify and isolate potential issues before they impact the network.
• Standards-based SNMP management and web-based GUI simplifies remote management and integrates easily into existing software platforms
• Built-in spectrum analyzer and an alarm log facilitate RF planning and post-deployment tuning
Cost-Effectively Prepare For Future Growth
The range of Lynx products gives operators the choice of capacity they need, allowing them to grow to support higher-bandwidth cellular backhaul applications.
• Extra capacity for bandwidth-intensive applications such as multimedia services, photo sharing, text messaging and handset Internet access
• Superior system gain ensures consistent, carrier-class transmission of growing network traffic
• No expensive recurring leased line costs
• Wayside Ethernet Channel enables far-end management of both Proxim and Non-Proxim equipment
Deploy in Days
Because Lynx radios operate in license-exempt ISM frequency bands, they can be deployed quickly – eliminating the long lead times associated with leasing lines or trenching new fiber optic cable.
• Rapid deployment and flexible re-deployment
• Mobile operators minimize costly network downtime
• License-exempt frequencies accelerate time-to-revenue by avoiding lengthy and costly
licensing procedures
Reliable and Secure
Proxim Lynx radios offer the highest security and reliability available in networking today.
• True Carrier-Class reliability
-Over 99.999% reliable RF transmission
-NEBS Level 3 ready for Central Office deployment1
• Meets or exceeds wired network security
• Proprietary encryption methods ensure secure data transmission |
|
Specs
| Product |
Frequency Band |
Digital Capacity (Full Duplex) |
Channel Pairs |
Threshold (BER=1x10-6) |
Output Power (minimum) 1 |
System Gain |
Distance (Miles/KM) |
| Lynx.GX 4xT1 |
5725-5850 MHz |
4xT1 (4x1.544 Mbps) |
3 (A, B, C) |
≤-88 dBm |
≥+23.5 dBm |
≥111.5 dB, 114 dB typ. |
>36/58.1 |
| Lynx.GX 8xT1 |
8xT1 (8x1.544 Mbps) |
2 (A, B) |
≤-86 dBm |
≥109.5 dB, 112 dB typ. |
>32.8/52.9 |
| Lynx.GX 16xT1 |
16xT1 (16x1.544 Mbps) |
1 (A) |
≤-83 dBm |
≥106.5 dB, 109 dB typ. |
>27.6/44.5 |
| System |
| Configuration |
Split-box: IDU, RF Unit |
| Modulation |
DSSS; QPSK |
| Frequency Stability |
±10 ppm |
| RF Attenuation Range |
≥20 dB |
| Maximum Receive Signal |
-20 dBm error free; 0 dBm no damage |
| Error Floor |
‹10-11 |
| Latency (T1)2, one-way |
325 µsec ±10% |
| Error Correction |
Reed-Solomon |
| Security |
12 character Link ID (48 bits) |
| Regulatory Compliance |
FCC Part 15.247; IC RS210 |
| FCC ID |
HZB-S58-GX1 |
| FCC Emmisions Designator |
9M6G7D (4T); 13M4G7D (8T); 28M1G7D (16T) |
| Industry Canada ID |
1856A-U5358GX1 |
| Reliability |
NEBS Level 3 ready |
| Digital Line Interfaces |
| DSX-1 (4, 8 or 16 each) |
| Connector |
RJ-48C modular jack |
| Line Code |
AMI or B8ZS, selectable |
| Line Buildout |
0-655 ft. selectable |
| Loopback |
Local, Far End, Internal Signal |
| Compliance |
ANSI-1987-102-T1 3 |
| Auxiliary Interfaces |
| Orderwire (DTMF) |
RJ-11, 100 addresses |
| VF |
8 pin modular jack, 4-wire |
|
0dBm @ 600 ohm, balanced |
| Aux Data (serial) |
8 pin modular jack, EIA-561 |
|
≤19.2kbps, selectable, DCE |
| Fault Interfaces |
| Network Management |
SNMP v2c (MIB II, Proxim enterprise MIBs), embedded HTML server, Telnet, VT-100 terminal |
| Far End Management |
Via NMS (embedded router, gateway address, subnet mask), front panel display |
| Interfaces |
| NMS 1 |
10/100BaseT, RJ-45, auto-sense |
| NMS 2 |
10/100BaseT, RJ-45, auto-sense |
| External Alarm Interface |
| Connector |
9-pin Sub-D female |
| Outputs |
2 Form C Relays (Major, Minor) |
| Inputs |
2 TTL with internal pull-ups |
| Power Environment |
| Input Voltage Range |
-20 to -60 Vdc or
+20 to +60 Vdc |
| Power Consumption |
‹70 Watts |
| Power Connector |
3-pin terminal block |
| Operating Temperature |
| IDU |
0°C to +50°C |
| RF Unit |
-30°C to +55°C |
| Humidity |
| IDU |
95%, non-condensing |
| RF Unit |
100%, condensing |
| Altitude |
up to 15,000 ft/5000 m |
| Wind Loading (RF Unit) |
up to 110 mph/96 kts |
| MTBF |
>100,000 hours (each IDU and RF Unit) |
| Physical Dimensions |
|
IDU |
RF Unit |
| Size (in/cm) |
17.2 X 10.9 X 1.72 / 43.6 X 27.6 X 4.4 |
14.1 X 10.9 X 1.72 / 35.8 X 27.6 X 4.4 |
| Weight (lbs/kg) |
6.5/2.9 |
12.0/5.4 |
| Mechanical |
| RF Unit |
Antenna Port(outdoor RF cable not provided) |
Type-N female |
|
IDU Port |
TNC female |
|
Cable to IDU |
LMR-240 or equiv. ‹100mLMR-400 or equiv. ‹200mLMR-600 or equiv. ‹300m |
| Mounting |
IDU |
EIA rackmount, 19" or 23", 1RU |
|
RF Unit |
EIA rackmount, 19"or 23", 1RU, or outdoor pole mount bracket (optional) |
| Selectable Frequency Channel Pairs |
| 4xT1 5.8 GHz |
A1: 5731.5 MHz, A2: 5816.5 MHz, B1: 5745 MHz, B2: 5830 MHz, C1: 5758.5 MHz, C2: 5843.5 MHz |
| 8xT1 5.8 GHz |
A1: 5734 MHz, A2: 5819 MHz, B1: 5756 MHz, B2: 5841 MHz |
| 16xT1 5.8 GHz |
A1: 5745 MHz, A2: 5830 MHz |
| Ordering Information |
|
Order Number |
Product Description |
| Lynx.GX 4T |
62291 |
Low Band Terminal, 301-51850-10L0 |
|
62292 |
High Band Terminal, 301-51850-10H0 |
| Lynx.GX 8T |
62139 |
Low Band Terminal, 301-51145-10L0 |
|
62142 |
High Band Terminal, 301-51145-10H0 |
| Lynx.GX 16T |
62284 |
Low Band Terminal, 301-52290-10L0 |
|
62286 |
High Band Terminal, 301-52290-10H0 |
|
ACC-GX-RF-2 |
Optional RF Unit Outdoor Mounting Kit |
|
201-31075-1 |
Optional AC Adapter 110/220 VAC with cable and connector |
|
Call for details |
ServPak 24x7 Enhanced Service and Support contracts (1yr-3yr) |
|
|
 |
Just
Released
Equipment
Specials |
|
|
|
|
|
|
|
|
 |
|
